 |
The leader in onsite wastewater technology
CONTROL PANELS - Commercial
|
The Command Center
Every Jet Commercial Wastewater Treatment Plant is supplied
with a pre-wired electrical
control panel that can monitor motor and blower operations,
flow, chlorination, spray, pumps
and other auxiliary equipment.
 |
All
Jet Commercial Plant electrical equipment is monitored
here, at the control panel. That
equipment is pre-wired at the Jet factory. All switches
and controls are clearly identified, and
a wiring diagram is furnished with each panel. Before
shipment of any control panel, Jet fully
tests all mechanical and electrical equipment to make
certain that all components are
operating properly.
|
An optional 24-hour time clock permits automatic cycling of
the motor(s) and blower(s). This
clock is preset at the Jet factory to operate the motor(s),
blower(s) and foam control for 15
minutes of each half hour. Motors and blowers can be run
manually with the toggle switch
that is included.
In our 2000 Series plants, the motor, blowers and control
panel itself are protected inside a
Jet weatherproof fiberglass equipment housing. Jet Series
3000 plants, a separate
weatherproof sheet metal enclosure with an equivalent NEMA
3R rating houses all electrical
controls. This enclosure is protected with at least two
coats of weather resistant paint. Both
2000 and 3000 Series enclosures are secured with
master-keyed padlocks.
Control Panel Options:
-
24-Hour Time Clock
-
Flow Recorder
-
Test Switch
-
7-Day Time Clock
-
115 V Receptacle
-
Foam Control/Spray Option
-
Chlorinator Option
-
Comminutor Option
-
Spare Switch
-
Automatic Alternation